The CBU-DCS-LR controller can handle an entire DALI2 bus (using an additional DALI line power supply) or work in D4i mode in a 1-to-1 connection with a dedicated constant-current LED driver. It can also work in transparent DALI Gateway mode as a wireless extension of an existing wired connection.

CBU-DCS-LR is a passive (requires an external DALI line power supply) long-range wireless controller with DALI and DALI2 interfaces. It has 8 “Group” addresses, so it supports up to 64 DT6 LED drivers, or 8 “Short” addresses, so it supports 2 DT8 RGBW devices or 4 DT8 TW devices.
CBU-DCS-LR is compliant with the IEC 62386-101 standard, so it can pass up to 250mA of current through the DALI circuit. Depending on requirements, the controller can act as a DALI Master, with the ability to address LED drivers in luminaires, or as a DALI Slave when connecting sensors or push-button panels with an active DALI output. The controller can also be a transparent wireless extender of a wired DALI line when connected to a higher-level DALI Master.
CBU-DCS-LR can also be configured as a panel of 1 to 8 buttons, a relay or a multisensor together with compatible DALI2 devices. The device automatically creates a Bluetooth MESH wireless infrastructure, so a larger number of luminaires can be controlled from any point in the Casambi network.
You can access all the functions through the dedicated Casambi APP software (downloadable on Apple App Store or Google Play Store).
| Practical range [m] | In the “Long Range” mode, where the network speed is reduced to 0.5MB/s and the devices use the high-sensitivity CBM-003 module. In “Best Performance” mode, where network speed is achieved at the expense of ranges between nodes In “Balanced” mode, where speed and range are optimized for networks of up to 100 nodes. |
|---|---|
| What power does it control? [W] | Depends on the sum of the powers of the connected DALI power supplies |
| Supply voltage [V] | |
| Maximum DALI line current [mA] | This is the maximum DALI line current described by the standard |
| Guaranteed DALI line current [mA] | |
| Operating frequency [Mhz] | Channels in the range of 2402 to 2480 Mhz |
| Maximum RF transmitter power [dBm] | This is the power measured at the antenna before the housing is mounted, and the ranges depend on many external factors, so use the “practical range” parameter. |
| Operating temperatures [oC] | |
| Maximum humidity [%] | Without water vapor condensation, because at a humidity of e.g. 80%, cooling the air causes the vapor to condense, which is harmful to electrical devices. |
| IP protection class [xy] | IP20 protection means that the device is protected against the ingress of solid objects larger than 12 mm in diameter (e.g. fingers), but does not provide protection against water. This is a basic protection standard, used in devices intended for use in dry rooms, where there is no exposure to dust or moisture. |
| IK protection class [xy] | The operating conditions of the device do not provide for mechanical shocks during installation and normal operation. |
| Overall dimensions L x W x H [mm] | |
| Extra Dimensions [mm] | |
| Housing material | |
| Weight [g] | |
| Color |
Fill out the form and we will send you a quote